{"title":"Kits","description":"","products":[{"product_id":"elektor-dual-dc-lisn-150-khz-200-mhz","title":"Elektor Dual DC LISN (150 kHz – 200 MHz)","description":"\u003cp\u003eMeasuring conducted emission is the simplest and most affordable method of getting some indication of whether a design can meet EMI\/EMC requirements. A \u003cstrong\u003eL\u003c\/strong\u003eine \u003cstrong\u003eI\u003c\/strong\u003empedance \u003cstrong\u003eS\u003c\/strong\u003etabilization \u003cstrong\u003eN\u003c\/strong\u003eetwork (LISN) is an indispensable part of an EMC pre-compliance test setup.\u003c\/p\u003e\n\u003cp\u003eIn cooperation with Würth Elektronik, Elektor has developed a 5 µH, 50 Ω Dual DC LISN that supports voltages up to 60 V and currents up to 10 A.\u003c\/p\u003e\n\u003cp\u003eThe instrument measures RF interferences on both channels (the power supply) by means of 5-μH blocking inductances. The internal 10-dB attenuation network – one in each channel – contains a 3rd-order high-pass filter with a cutoff frequency of 9 kHz to protect the input of instruments like a spectrum analyzer from potentially harmful DC voltages or low frequencies coming from the EUT (Equipment Under Test).\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eRF path\u003c\/th\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e2 (with clamping diodes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBandwidth\u003c\/td\u003e\n\u003ctd\u003e150 kHz – 200 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInductance\u003c\/td\u003e\n\u003ctd\u003e5 μH || 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal attenuation\u003c\/td\u003e\n\u003ctd\u003e10 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eSMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDC path\u003c\/th\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. current\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 10 A\u003csub\u003eDC\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. voltage\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 60 V\u003csub\u003eDC\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC resistance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 2 x 70 mΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCB size\u003c\/td\u003e\n\u003ctd\u003e94.2 x 57.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e4-mm banana\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHammond enclosure\u003c\/th\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003e1590N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e121 x 66 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 4-layer PCB with all SMT parts fitted\u003c\/li\u003e\n\u003cli\u003e1x pre-drilled enclosure with ready-printed front panel layout\u003c\/li\u003e\n\u003cli\u003e5x gold-plated, insulated, 4-mm banana sockets, rated for 24 A, 1 kV\u003c\/li\u003e\n\u003cli\u003e1x Hammond enclosure 1590N1, Aluminum (Die-Cast Alloy)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMore Info\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/labs\/dual-dc-lisn-for-emc-pre-compliance-testing-210296\" rel=\"noopener\" target=\"_blank\"\u003eProject on Elektor Labs: Dual DC LISN for EMC pre-compliance testing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/magazine\/elektor-183\/59837\" rel=\"noopener\" target=\"_blank\"\u003eElektor 9-10\/2021: EMC Pre-Compliance Test for Your DC-Powered Project (Part 1)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/magazine\/elektor-187\/59931\" rel=\"noopener\" target=\"_blank\"\u003eElektor 11-12\/2021: EMC Pre-Compliance Test for Your DC-Powered Project (Part 2)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":46907174617420,"sku":"19869","price":139.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/elektor-dual-dc-lisn-150-khz-200-mhz19869-912351.jpg?v=1739894921"},{"product_id":"joy-pi-advanced-development-platform-for-raspberry-pi-arduino-and-esp32","title":"Joy-Pi Advanced Development Platform (incl. Raspberry Pi 4, 8 GB)","description":"\u003cp\u003eThe Joy-Pi Advanced is a compact and powerful device that allows you to realize your projects quickly and easily. Whether you already have a lot of experience, or next to none, the Joy-Pi Advanced lets you unleash your creativity. Thanks to its compatibility with a wide range of platforms, including Raspberry Pi, Raspberry Pi Pico, Arduino Nano, BBC micro:bit, and NodeMCU ESP32, you can easily and quickly access your preferred platform.\u003c\/p\u003e\n\u003cp\u003eIn addition, the Joy-Pi Advanced features more than 30 stations, lessons, and modules, giving you an unlimited variety of ways to get your projects done. With the self-developed learning center, you can not only improve your skills but also create new projects. The learning center offers a wealth of information and tutorials that will guide you step by step through your projects.\u003c\/p\u003e\n\u003cp\u003eJoy-Pi Advanced is characterized in particular by its intelligent switch units, which allow an extended use of the available pins. A total of three switch units are integrated, each equipped with 12 individual switches that provide precise control of the connected sensors and modules. This system solves the well-known problem of limited pin count that occurs with conventional microcontrollers. The switch units allow you to operate a large number of sensors and modules in parallel by switching them on and off individually. This simulates multiple pin assignment, allowing you to exploit the full power of your projects without compromising functionality.\u003c\/p\u003e\n\u003cp\u003eBy combining innovative adapter boards and the micro:bit slot, you can achieve seamless compatibility with a wide range of microcontrollers such as Raspberry Pi Pico, NodeMCU ESP32, micro:mit and Arduino Nano. The specially developed adapter boards are designed to perfectly match the respective microcontroller. By plugging the microcontroller onto the appropriate adapter board and then plugging it into the micro:bit slot, the Joy-Pi Advanced quickly and easily becomes compatible with the different microcontrollers. This allows seamless integration of your preferred platform and the ability to combine the strengths of the different microcontrollers in your projects. This way, you can fully focus on your creative projects without worrying about the compatibility of different microcontrollers. The Joy-Pi Advanced simplifies the development process and gives you the possibility to design your projects flexibly and individually.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHighly integrated development platform \u0026amp; learning center\u003c\/li\u003e\n\u003cli\u003eFast, easy \u0026amp; wireless combination of various sensors \u0026amp; actuators\u003c\/li\u003e\n\u003cli\u003eInstallation option for Raspberry Pi 4\u003c\/li\u003e\n\u003cli\u003eCompatible with various microcontrollers\u003c\/li\u003e\n\u003cli\u003eSelf-developed, didactic learning platform for Raspberry Pi \u0026amp; Windows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible to\u003c\/td\u003e\n\u003ctd\u003eRaspberry Pi 4, Arduino Nano, NodeMCU ESP32, BBC micro:bit, Raspberry Pi Pico\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstalled sensors, actuators \u0026amp; components\u003c\/td\u003e\n\u003ctd\u003e39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLearning platform\u003c\/td\u003e\n\u003ctd\u003eOver 40 entries in the know-ledge database, 10 projects, 10 learning tasks, 14 visions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplays\u003c\/td\u003e\n\u003ctd\u003e7-segment display, 16x2 display, 1.8“ TFT display, 0.96\" OLED display, 8x8 RGB matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003eDS18B20, shock sensor, hall sensor, barometer, sound sensor, gyroscope, PIR sensor, Light barrier, NTC, Light sensor, 6x touch sensor, color sensor, ultrasonic distance sensor, DHT11 temperature \u0026amp; humidity sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eJoystick, 5x switches, potentiometer, rotary encoder, 4x4 button matrix, relays, PWM fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotors\u003c\/td\u003e\n\u003ctd\u003eServo interface, Stepper motor interface, Vibration motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasuring \u0026amp; conversion modules\u003c\/td\u003e\n\u003ctd\u003eAnalog-Digital Converter, Level converter, voltmeter, Variable voltage supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther components\u003c\/td\u003e\n\u003ctd\u003eRTC real time clock, buzzer, EEPROM memory, infrared receiver, breadboard, RFID reader\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter boards\u003c\/td\u003e\n\u003ctd\u003eAdapter for NodeMCU ESP32, Arduino Nano \u0026amp; Raspberry Pi Pico, Board connectors for Raspberry Pi \u0026amp; External Boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectronic components\u003c\/td\u003e\n\u003ctd\u003eInfrared remote control, RFID chip, RFID card, 6x alligator clips, microSD card reader, servo motor, stepper motor, 32 GB microSD card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponents\u003c\/td\u003e\n\u003ctd\u003e40x resistors, 3x green LEDs, 3x yellow LEDs, 3x red LEDs, 1x transistor, 5x buttons, 1x potentiometer, 2x capacitors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther accessories\u003c\/td\u003e\n\u003ctd\u003eScrew assortment, screwdriver, accessory storage bag, power supply \u0026amp; power cable, servo mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eBuilt-in power supply: 36 W, 12 V, 3 A Case connector: Small device plug C8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage outputs\u003c\/td\u003e\n\u003ctd\u003e12 V, 5 V, 3.3 V, Variable voltage output (2-11 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData buses \u0026amp; signal outputs\u003c\/td\u003e\n\u003ctd\u003eI²C, SPI, Analog to digital converter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery (RTC)\u003c\/td\u003e\n\u003ctd\u003eCR2032\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e327 x 200 x 52 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi 4 (8 GB RAM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.joy-pi.net\/en\/downloads\" target=\"_blank\"\u003eJoy-Pi website\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.joy-it.net\/files\/files\/Produkte\/RB-JoyPi-Advanced\/RB-JoyPi-Advanced_Datasheet_2023-07-10.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.joy-pi.net\/files\/files\/downloads\/joypiadvanced\/RB-JoyPi-Advanced_Manual_2023-10-31.pdf\" target=\"_blank\"\u003eManual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/zxy2caWp-Ig\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"JOY-iT","offers":[{"title":"Default Title","offer_id":47310500888908,"sku":"20589","price":469.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/joy-pi-advanced-incl-raspberry-pi-4.jpg?v=1779867273"},{"product_id":"elektor-sand-clock-for-raspberry-pi-pico","title":"Elektor Sand Clock for Raspberry Pi Pico","description":"\u003ch2\u003eRaspberry Pi-based Eye Catcher\u003c\/h2\u003e\n\u003cp\u003eA standard sand clock just shows how time passes. In contrast, this Raspberry Pi Pico-controlled sand clock shows the exact time by “engraving” the four digits for hour and minute into the layer of sand. After an adjustable time the sand is flattened out by two vibration motors and everything begins all over again.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the sand clock are two servo motors driving a writing pen through a pantograph mechanism. A third servo motor lifts the pen up and down. The sand container is equipped with two vibration motors to flatten the sand. The electronic part of the sand clock consists of a Raspberry Pi Pico and an RTC\/driver board with a real-time clock, plus driver circuits for the servo motors.\u003c\/p\u003e\n\u003cp\u003eA detailed construction manual is available for downloading.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 135 x 110 x 80 mm\u003c\/li\u003e\n\u003cli\u003eBuild time: approx. 1.5 to 2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3x Precut acrylic sheets with all mechanical parts\u003c\/li\u003e\n\u003cli\u003e3x Mini servo motors\u003c\/li\u003e\n\u003cli\u003e2x Vibration motors\u003c\/li\u003e\n\u003cli\u003e1x Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003e1x RTC\/driver board with assembled parts\u003c\/li\u003e\n\u003cli\u003eNuts, bolts, spacers, and wires for the assembly\u003c\/li\u003e\n\u003cli\u003eFine-grained white sand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Q48aRQ7KmXI\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/RSsmcME9Gdc\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":47310512226636,"sku":"20679","price":39.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/sand-clock-kit-based-on-raspberry-pi-pico20679-545580.jpg?v=1742227178"},{"product_id":"elektor-one-armed-bandit","title":"Elektor One-armed Bandit","description":"\u003ch2\u003ePull Down Lever For Highest Score!\u003c\/h2\u003e\n\u003cp\u003eThis Elektor Circuit Classic from 1984 shows a playful application of CMOS 400x series logic ICs in combination with LEDs, a highly popular combination at the time. The project imitates a spinning-digit type slot machine.\u003c\/p\u003e\n\u003ch2\u003eThe Game\u003c\/h2\u003e\n\u003cp\u003eTo play the game, first agree on the number of rounds. Player 1 actuates the switch lever as long as desired and releases it. The LEDs then show the score which is the sum of the 50-20-10-5 digits lit up. If the \u003cem\u003ePlay Again!\u003c\/em\u003e LED lights, Player 1 has another, “free” round. If not, it’s Player 2’s turn. The players keep tab of their scores, and the highest score wins.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLEDs Indicate Score\u003c\/li\u003e\n\u003cli\u003eMulti-Player and \u003cem\u003ePlay Again!\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eElektor Heritage Circuit Symbols\u003c\/li\u003e\n\u003cli\u003eTried \u0026amp; Tested by Elektor Labs\u003c\/li\u003e\n\u003cli\u003eEducational \u0026amp; Geeky Project\u003c\/li\u003e\n\u003cli\u003eThrough-Hole Parts Only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrinted Circuit Board\u003c\/li\u003e\n\u003cli\u003eAll Components\u003c\/li\u003e\n\u003cli\u003eWooden Stand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBill of Materials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eResistors (5%, 250 mW)\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eR1,R2,R3,R4 = 100kΩ\u003c\/li\u003e\n\u003cli\u003eR5,R6,R7,R8,R9,R10 = 1kΩ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCapacitors\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eC1 = 4.7nF, 10%, 50V, 5mm\u003c\/li\u003e\n\u003cli\u003eC2 = 4.7μF, 10%, 63V, axial\u003c\/li\u003e\n\u003cli\u003eC3,C4 = 100nF, 10 %, 50V, ceramic X7R, 5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eSemiconductors\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eLED1-LED6 = red, 5mm (T1 3\/4)\u003c\/li\u003e\n\u003cli\u003eIC1 = 74HC4024\u003c\/li\u003e\n\u003cli\u003eIC2 = 74HC132\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMiscellaneous\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eS1 = switch, toggle, 21mm lever, SPDT, momentary\u003c\/li\u003e\n\u003cli\u003eS2 = switch, tactile, 24V, 50mA, 6x6mm\u003c\/li\u003e\n\u003cli\u003eS3 = switch, slide, SPDT\u003c\/li\u003e\n\u003cli\u003eIC1,IC2 = IC socket, DIP14\u003c\/li\u003e\n\u003cli\u003eBT1 = PCB-mount CR2032 battery retainer clip\u003c\/li\u003e\n\u003cli\u003eDesktop Stand\u003c\/li\u003e\n\u003cli\u003ePCB 230098-1\u003c\/li\u003e\n\u003cli\u003eNot included: BT1 = CR2032 coin cell battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":47318771073356,"sku":"20516","price":15.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/elektor-one-armed-bandit-kit20516-742073.jpg?v=1718724179"},{"product_id":"whadda-3d-xmas-tree","title":"Whadda 3D Xmas Tree Kit","description":"\u003cp\u003eThe Whadda 3D Xmas Tree Kit is aimed at hobbyists and beginners who are interested in soldering and electronics. With this DIY kit, you can build a festive LED Christmas tree.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e16 flashing red LEDs\u003c\/li\u003e\n\u003cli\u003eExtra green and yellow LEDs provided to customise your tree\u003c\/li\u003e\n\u003cli\u003eCan be hung on and fed through wires\u003c\/li\u003e\n\u003cli\u003eWill operate on 12 V DC (e.g. in cars)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow power consumption\u003c\/td\u003e\n\u003ctd\u003e8 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e9 V battery operation (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e102 x 88 x 80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e65 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.velleman.eu\/downloads\/0\/minikits\/manuals\/manual_mk130.pdf\" target=\"_blank\"\u003eManual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Velleman","offers":[{"title":"Default Title","offer_id":47884107743564,"sku":"20842","price":10.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/whadda-3d-xmas-tree-kit-5410329727208-249363.jpg?v=1732885506"},{"product_id":"whadda-electronic-dice","title":"Whadda Electronic Dice","description":"\u003cp\u003eThis electronic dice with 7 red LEDs rolls when the push button is released and works with a 9 V battery (not included).\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.velleman.eu\/downloads\/25\/soldering_kits\/manual_wsg113.pdf\" target=\"_blank\"\u003eManual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Velleman","offers":[{"title":"Default Title","offer_id":47884111380812,"sku":"20843","price":6.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/whadda-electronic-dice-5410329730529-797702.jpg?v=1738931148"},{"product_id":"elektor-audio-dsp-fx-processor","title":"Elektor Audio DSP FX Processor (New Revision)","description":"\u003cp\u003eThe Elektor Audio DSP FX Processor combines an ESP32 microcontroller and an ADAU1701 Audio DSP from Analog Devices. Besides a user-programmable DSP core, the ADAU1701 has high-quality analog-to-digital and digital-to-analog converters built-in and features an I²S port. This makes it suitable as a high-quality audio interface for the ESP32.\u003c\/p\u003e\n\u003cp\u003ePrograms for the ESP32 can be created with Arduino, Platform IO, CMake or by using the Espressif IDF in another way. Programs for the ADAU7101 audio DSPs are created with the free visual programming tool \u003ca href=\"https:\/\/www.analog.com\/sigmastudio\" target=\"_blank\"\u003eSigmaStudio\u003c\/a\u003e by dragging and dropping pre-defined algorithm blocks on a canvas.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth\/Wi-Fi audio sink (e.g. loudspeaker) \u0026amp; source\u003c\/li\u003e\n\u003cli\u003eGuitar effect pedal (stomp box)\u003c\/li\u003e\n\u003cli\u003eMusic synthesizer\u003c\/li\u003e\n\u003cli\u003eSound\/function generator\u003c\/li\u003e\n\u003cli\u003eProgrammable cross-over filter for loudspeakers\u003c\/li\u003e\n\u003cli\u003eAdvanced audio effects processor (reverb, chorus, pitch shifting, etc.)\u003c\/li\u003e\n\u003cli\u003eInternet-connected audio device\u003c\/li\u003e\n\u003cli\u003eDSP experimentation platform\u003c\/li\u003e\n\u003cli\u003eWireless MIDI\u003c\/li\u003e\n\u003cli\u003eMIDI to CV converter\u003c\/li\u003e\n\u003cli\u003eand many more...\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eADAU1701 28-\/56-bit, 50-MIPS digital audio processor supporting sampling rates of up to 192 kHz\u003c\/li\u003e\n\u003cli\u003eESP32 32-bit dual-core microcontroller with Wi-Fi 802.11b\/g\/n and Bluetooth 4.2 BR\/EDR and BLE\u003c\/li\u003e\n\u003cli\u003e2x 24-bit audio inputs (2 V RMS, 20 kΩ)\u003c\/li\u003e\n\u003cli\u003e4x 24-bit audio outputs (0.9 V RMS, 600 Ω)\u003c\/li\u003e\n\u003cli\u003e4x Control potentiometer\u003c\/li\u003e\n\u003cli\u003eMIDI in- and output\u003c\/li\u003e\n\u003cli\u003eI²C expansion port\u003c\/li\u003e\n\u003cli\u003eMulti-mode operation\u003c\/li\u003e\n\u003cli\u003ePower supply: 5 V DC USB or 7.5-12 V DC (barrel jack, center pin is GND)\u003c\/li\u003e\n\u003cli\u003eCurrent consumption (average): 200 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ESP32 Audio DSP FX Processor board (assembled)\u003c\/li\u003e\n\u003cli\u003e1x \u003ca href=\"https:\/\/www.qavlunxerzi.info\/products\/esp32-pico-kit\" target=\"_blank\"\u003eESP32-PICO-KIT\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x Jumpers\u003c\/li\u003e\n\u003cli\u003e2x 18-pin headers (female)\u003c\/li\u003e\n\u003cli\u003e4x 10 KB potentiometers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/labs\/audio-dsp-fx-processor\" target=\"_blank\"\u003eDocumentation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/ClemensAtElektor\/Elektor_AudioDSP\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":48232208269644,"sku":"20895","price":84.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/Elektor-Audio-DSP-FX-Processor.jpg?v=1744620790"},{"product_id":"elektor-esp32-energy-meter","title":"Elektor ESP32 Energy Meter","description":"\u003cp\u003eThe Elektor ESP32 Energy Meter is a device designed for real-time energy monitoring and smart home integration. Powered by the ESP32-S3 microcontroller, it offers robust performance with modular and scalable features.\u003c\/p\u003e\n\u003cp\u003eThe device uses a 110\/230 V\u003csub\u003eAC\u003c\/sub\u003e to 12 V\u003csub\u003eAC\u003c\/sub\u003e step-down transformer for voltage sampling, ensuring galvanic isolation and safety. Its compact PCB layout includes screw-type terminal blocks for secure connections, a Qwiic connector for additional sensors, and a programming header for direct ESP32-S3 configuration. The energy meter is compatible with single-phase and three-phase systems, making it adaptable for various applications.\u003c\/p\u003e\n\u003cp\u003eThe energy meter is simple to set up and integrates with Home Assistant, offering real-time monitoring, historical analytics, and automation capabilities. It provides accurate measurements of voltage, current, and power, making it a valuable tool for energy management in homes and businesses.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Energy Monitoring:\u003c\/strong\u003e Get detailed insights into your energy usage for smarter management and cost savings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Software:\u003c\/strong\u003e Tailor functionality to your needs by programming and integrating custom sensors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Home Ready:\u003c\/strong\u003e Compatible with ESPHome, Home Assistant, and MQTT for full Smart Home integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe \u0026amp; Flexible Design:\u003c\/strong\u003e Operates with a 110\/230 V\u003csub\u003eAC\u003c\/sub\u003e to 12 V\u003csub\u003eAC\u003c\/sub\u003e step-down transformer and features a pre-assembled SMD board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Start:\u003c\/strong\u003e Includes one Current Transformer (CT) sensor and access to free setup resources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMicrocontroller\u003c\/td\u003e\n\u003ctd\u003eESP32-S3-WROOM-1-N8R2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Metering IC\u003c\/td\u003e\n\u003ctd\u003eATM90E32AS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Indicators\u003c\/td\u003e\n\u003ctd\u003e4x LEDs for power consumption indication\u003cbr\u003e2x Programmable LEDs for custom status notifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUser Input\u003c\/td\u003e\n\u003ctd\u003e2x Push buttons for user control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Output\u003c\/td\u003e\n\u003ctd\u003eI²C OLED display for real-time power consumption visualization\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e12~16 V\u003csub\u003eAC\u003c\/sub\u003e (via a step-down transformer 110\/230 V\u003csub\u003eAC\u003c\/sub\u003e to 12 V\u003csub\u003eAC\u003c\/sub\u003e)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamp Current Sensor\u003c\/td\u003e\n\u003ctd\u003eYHDC SCT013-000 (100 A\/50 mA) included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart Home Integration\u003c\/td\u003e\n\u003ctd\u003eESPHome, Home Assistant, and MQTT for seamless connectivity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectivity\u003c\/td\u003e\n\u003ctd\u003eHeader for programming, Qwiic for sensor expansion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eSupports single-phase and three-phase energy monitoring systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e79.5 x 79.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Partly assembled board (SMDs are pre-mounted)\u003c\/li\u003e\n\u003cli\u003e2x Screw terminal block connectors (not mounted)\u003c\/li\u003e\n\u003cli\u003e1x YHDC SCT013-000 current transformer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequired\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower transformer not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.espressif.com\/sites\/default\/files\/documentation\/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf\" target=\"_blank\"\u003eDatasheet (ESP32-S3-WROOM-1)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ww1.microchip.com\/downloads\/aemDocuments\/documents\/OTH\/ProductDocuments\/DataSheets\/Atmel-46003-SE-M90E32AS-Datasheet.pdf\" target=\"_blank\"\u003eDatasheet (ATM90E32AS)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2723\/6858\/files\/SCT013_5b22fa10-3b01-4e3e-a77a-49f08879930b.pdf\" target=\"_blank\"\u003eDatasheet (SCT013-000)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/FAQ_Elektor_ESP32_Energy_Meter.pdf\" target=\"_blank\"\u003eFrequently Asked Questions (FAQ)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eFrom Prototype to Finished Product\u003c\/h2\u003e\n\u003cp\u003eWhat started as an \u003ca href=\"https:\/\/www.elektormagazine.com\/articles\/esp32-based-energy-meter-project-introduction\" target=\"_blank\"\u003einnovative project\u003c\/a\u003e to create a reliable and user-friendly energy meter using the ESP32-S3 microcontroller has evolved into a robust product. Initially developed as an \u003ca href=\"https:\/\/www.elektormagazine.com\/labs\/esp32-energy-meter-an-open-source-solution-for-real-time-energy-monitoring\" target=\"_blank\"\u003eopen-source project\u003c\/a\u003e, the ESP32 Energy Meter aimed to provide precise energy monitoring, smart home integration and more. Through meticulous hardware and firmware development, the energy meter now stands as a compact, versatile solution for energy management.\u003c\/p\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":48885147959628,"sku":"21044","price":64.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/Elektor-ESP32-Energy-Meter.jpg?v=1737984721"},{"product_id":"elektor-mini-wheelie-self-balancing-robot","title":"Elektor Mini-Wheelie Self-Balancing Robot","description":"\u003ch2\u003eArduino-compatible, ESP32-controlled, 2-wheeled Balancing Robot\u003c\/h2\u003e\n\u003cp\u003eThe Elektor Mini-Wheelie is an experimental autonomous self-balancing robot platform. Based on an ESP32-S3 microcontroller, the self-balancing robot is fully programmable using the Arduino environment and open-source libraries. Its wireless capabilities allow it to be controlled remotely over Wi-Fi, Bluetooth or ESP-NOW or to communicate with a user or even another robot.\u003c\/p\u003e\n\u003cp\u003eAn ultrasonic transducer is available for detecting obstacles. Its color display can be used for displaying cute facial expressions or, for the more down-to-earth users, cryptic debug messages.\u003c\/p\u003e\n\u003cp\u003eThe robot comes as a neat kit of parts that you must assemble yourself. Everything is included, even a screwdriver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Mini-Wheelie is an educational development platform intended for learning, experimentation, and robotics development. It is not classified as a toy for children, and its features, documentation, and intended audience reflect this purpose. The product is aimed at students, educators, and developers who wish to explore robotics, programming, and hardware integration in an educational setting.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESP32-S3 microcontroller with Wi-Fi and Bluetooth\u003c\/li\u003e\n\u003cli\u003eMPU6050 6-axis Inertial Measurement Unit (IMU)\u003c\/li\u003e\n\u003cli\u003eTwo independently controlled 12 V electric motors with tachometer\u003c\/li\u003e\n\u003cli\u003eUltrasonic transducer\u003c\/li\u003e\n\u003cli\u003e2.9\" TFT color display (320 x 240)\u003c\/li\u003e\n\u003cli\u003eMicroSD card slot\u003c\/li\u003e\n\u003cli\u003eBattery power monitor\u003c\/li\u003e\n\u003cli\u003e3S rechargeable Li-Po battery (11.1 V\/2200 mAh)\u003c\/li\u003e\n\u003cli\u003eBattery charger included\u003c\/li\u003e\n\u003cli\u003eArduino-based open-source software\u003c\/li\u003e\n\u003cli\u003eDimensions (W x L x H): 23 x 8 x 13 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ESP32-S3 Mainboard + MPU6050 module\u003c\/li\u003e\n\u003cli\u003e1x LCD board (2.9 inch)\u003c\/li\u003e\n\u003cli\u003e1x Ultrasonic sensor\u003c\/li\u003e\n\u003cli\u003e1x Battery pack (2200 mAh)\u003c\/li\u003e\n\u003cli\u003e1x Battery charger\u003c\/li\u003e\n\u003cli\u003e1x Motor tyre kit\u003c\/li\u003e\n\u003cli\u003e1x Case board\u003c\/li\u003e\n\u003cli\u003e1x Acrylic board\u003c\/li\u003e\n\u003cli\u003e1x Screwdriver\u003c\/li\u003e\n\u003cli\u003e1x Protective strip\u003c\/li\u003e\n\u003cli\u003e1x Flex cable B (8 cm)\u003c\/li\u003e\n\u003cli\u003e1x Flex cable A (12 cm)\u003c\/li\u003e\n\u003cli\u003e1x Flex cable C\u003c\/li\u003e\n\u003cli\u003e4x Copper column A (25 mm)\u003c\/li\u003e\n\u003cli\u003e4x Copper column B (55 mm)\u003c\/li\u003e\n\u003cli\u003e4x Copper column C (5 mm)\u003c\/li\u003e\n\u003cli\u003e2x Plastic nylon column\u003c\/li\u003e\n\u003cli\u003e8x Screws A (10 mm)\u003c\/li\u003e\n\u003cli\u003e24x Screws B (M3x5)\u003c\/li\u003e\n\u003cli\u003e8x Nuts\u003c\/li\u003e\n\u003cli\u003e24x Metal washers\u003c\/li\u003e\n\u003cli\u003e2x Zip tie\u003c\/li\u003e\n\u003cli\u003e1x MicroSD card (32 GB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/labs\/self-balancing-robot-with-maker-fabs\" target=\"_blank\"\u003eDocumentation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/f5CLBF4TPPs\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/U-MzV6cyjKI\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":49122777661772,"sku":"21087","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/elektor-self-balancing-robot-kit-7442105134113-933707.jpg?v=1739977116"},{"product_id":"elektor-laser-head-upgrade-for-sand-clock","title":"Elektor Laser Head Upgrade for Sand Clock","description":"\u003cp\u003eThe Elektor Laser Head transforms the \u003ca href=\"https:\/\/www.qavlunxerzi.info\/products\/elektor-sand-clock-for-raspberry-pi-pico\" target=\"_blank\"\u003eElektor Sand Clock\u003c\/a\u003e into a clock that writes the time on glow-in-the-dark film instead of sand. In addition to displaying the time, it can also be used to create ephemeral drawings. The 5 mW laser pointer, with a wavelength of 405 nm, produces bright green drawings on the glow-in-the-dark film. For best results, use the kit in a dimly lit room. \u003cstrong\u003eWarning:\u003c\/strong\u003e Never look directly into the laser beam!\u003c\/p\u003e\n\u003cp\u003eThe kit includes all the necessary components, but soldering three wires is required.\u003c\/p\u003e\n\u003cp\u003eNote: This kit is also compatible with the original Arduino-based Sand Clock from 2017. For more details, see \u003ca href=\"https:\/\/www.elektormagazine.com\/magazine\/elektor-201701\/40130\" target=\"_blank\"\u003eElektor Magazine 1-2\/2017\u003c\/a\u003e and \u003ca href=\"https:\/\/www.elektormagazine.com\/magazine\/elektor-201801\/41254\" target=\"_blank\"\u003eElektor Magazine 1-2\/2018\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/RSsmcME9Gdc\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":51777565458764,"sku":"21107","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/elektor-laser-pen-for-sand-clock-kit-7442105134137-401491.jpg?v=1742227178"},{"product_id":"elektor-milliohmmeter-adapter","title":"Elektor Milliohmmeter Adapter","description":"\u003cp\u003eThe Elektor Milliohmmeter Adapter uses the precision of a multimeter to measure very low resistance values. It is an adapter that converts a resistance into a voltage that can be measured with a standard multimeter.\u003c\/p\u003e\n\u003cp\u003eThe Elektor Milliohmmeter Adapter can measure resistances below 1 mΩ using a 4-wire (Kelvin) method. It is useful for locating short circuits on printed circuit boards (PCB).\u003c\/p\u003e\n\u003cp\u003eThe adapter features three measurement ranges – 1 mΩ, 10 mΩ, and 100 mΩ – selectable via a slide switch. It also includes onboard calibration resistors. The Elektor Milliohmmeter Adapter is powered by three 1.5 V AA batteries (not included).\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement ranges\u003c\/td\u003e\n\u003ctd\u003e1 mΩ, 10 mΩ, 100 mΩ, 0.1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e3x 1.5 V AA batteries (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e103 x 66 x 18 mm (compatible with \u003ca href=\"https:\/\/www.hammfg.com\/pdf\/1593N.pdf\" target=\"_blank\"\u003eHammond 1593N\u003c\/a\u003e-type enclosure, not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial feature\u003c\/td\u003e\n\u003ctd\u003eOn-board calibration resistors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/labs\/elektor-milliohm-meter\" target=\"_blank\"\u003eDocumentation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":52047107391820,"sku":"21147","price":34.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/elektor-milliohmmeter-adapter-7442105134151-509017.jpg?v=1743545970"},{"product_id":"elektor-sand-clock-for-raspberry-pi-pico-incl-laser-head-upgrade","title":"Elektor Sand Clock for Raspberry Pi Pico (incl. Laser Head Upgrade)","description":"\u003cp\u003eThis bundle contains the popular Elektor Sand Clock for Raspberry Pi Pico and the new Elektor Laser Head Upgrade, offering even more options for displaying the time. Not only can you \"engrave\" the current time in sand, you can now alternatively write it on a glow-in-the-dark foil or create green drawings.\u003c\/p\u003e\n\u003ch2\u003eContents of the bundle\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.qavlunxerzi.info\/products\/elektor-sand-clock-for-raspberry-pi-pico\" target=\"_blank\"\u003eElektor Sand Clock for Raspberry Pi Pico\u003c\/a\u003e (normal price: €50)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.qavlunxerzi.info\/products\/elektor-laser-head-upgrade-for-sand-clock\" target=\"_blank\"\u003eElektor Laser Head Upgrade for Sand Clock\u003c\/a\u003e (normal price: €35)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eElektor Sand Clock for Raspberry Pi (Raspberry Pi-based Eye Catcher)\u003c\/h2\u003e\n\u003cp\u003eA standard sand clock just shows how time passes. In contrast, this Raspberry Pi Pico-controlled sand clock shows the exact time by \"engraving\" the four digits for hour and minute into the layer of sand. After an adjustable time the sand is flattened out by two vibration motors and everything begins all over again.\u003c\/p\u003e\n\u003cp\u003eAt the heart of the sand clock are two servo motors driving a writing pen through a pantograph mechanism. A third servo motor lifts the pen up and down. The sand container is equipped with two vibration motors to flatten the sand. The electronic part of the sand clock consists of a Raspberry Pi Pico and an RTC\/driver board with a real-time clock, plus driver circuits for the servo motors.\u003c\/p\u003e\n\u003cp\u003eA detailed construction manual is available for downloading.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 135 x 110 x 80 mm\u003c\/li\u003e\n\u003cli\u003eBuild time: approx. 1.5 to 2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3x Precut acrylic sheets with all mechanical parts\u003c\/li\u003e\n\u003cli\u003e3x Mini servo motors\u003c\/li\u003e\n\u003cli\u003e2x Vibration motors\u003c\/li\u003e\n\u003cli\u003e1x Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003e1x RTC\/driver board with assembled parts\u003c\/li\u003e\n\u003cli\u003eNuts, bolts, spacers, and wires for the assembly\u003c\/li\u003e\n\u003cli\u003eFine-grained white sand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Q48aRQ7KmXI\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eElektor Laser Head Upgrade for Sand Clock\u003c\/h2\u003e\n\u003cp\u003eThe new Elektor Laser Head transforms the Sand Clock into a clock that writes the time on glow-in-the-dark film instead of sand. In addition to displaying the time, it can also be used to create ephemeral drawings. The 5 mW laser pointer, with a wavelength of 405 nm, produces bright green drawings on the glow-in-the-dark film. For best results, use the kit in a dimly lit room. \u003cstrong\u003eWarning:\u003c\/strong\u003e Never look directly into the laser beam!\u003c\/p\u003e\n\u003cp\u003eThe kit includes all the necessary components, but soldering three wires is required.\u003c\/p\u003e\n\u003cp\u003eNote: This kit is also compatible with the original Arduino-based Sand Clock from 2017. For more details, see \u003ca href=\"https:\/\/www.elektormagazine.com\/magazine\/elektor-201701\/40130\" target=\"_blank\"\u003eElektor Magazine 1-2\/2017\u003c\/a\u003e and \u003ca href=\"https:\/\/www.elektormagazine.com\/magazine\/elektor-201801\/41254\" target=\"_blank\"\u003eElektor Magazine 1-2\/2018\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/RSsmcME9Gdc\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":52187113128268,"sku":"21169","price":69.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/elektor-sand-clock-for-raspberry-pi-incl-laser-head-upgrade-021169-799567.jpg?v=1742239554"},{"product_id":"elektor-am-transmitter-kit","title":"Elektor AM Transmitter Kit","description":"\u003ch2\u003eBuild Your Own Vintage Radio Broadcaster\u003c\/h2\u003e\n\u003cp\u003eThe Elektor AM Transmitter Kit allows streaming audio to vintage AM radio receivers. Based on a Raspberry Pi Pico microcontroller module, the AM Transmitter can transmit on 32 frequencies in the AM band, from 500 kHz up to 1.6 MHz in 32 steps of approx. 35 kHz.\u003c\/p\u003e\n\u003cp\u003eThe frequency is selected with a potentiometer and shown on a 0.96\" OLED display. A pushbutton allows toggles the transmitting mode between On and Off. The range of the transmitter depends on the antenna. The onboard antenna provides a range of a few centimeters, requiring the AM Transmitter to be placed close to or inside the radio. An external loop antenna (not included) can be connected to increase the range.\u003c\/p\u003e\n\u003cp\u003eThe Elektor AM Transmitter Kit comes as a kit of parts that you must solder to the board yourself.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe board is compatible with a Hammond 1593N enclosure (not included).\u003cbr\u003eA 5 VDC power supply with micro-USB connector (e.g., an old phone charger) is needed to power the kit (not included). Current consumption is 100 mA.\u003c\/p\u003e\n\u003cp\u003eThe Arduino software (requiring \u003ca rel=\"noopener\" href=\"https:\/\/github.com\/earlephilhower\/arduino-pico?search=1\" target=\"_blank\"\u003eEarle Philhower’s RP2040 Boards Package\u003c\/a\u003e) for the Elektor AM Transmitter Kit plus more information is available at the \u003ca rel=\"noopener\" href=\"https:\/\/www.elektormagazine.com\/labs\/am-transmitter\" target=\"_blank\"\u003eElektor Labs page of this project.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eComponent List\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eResistors\n\u003cul\u003e\n\u003cli\u003eR1, R4 = 100 Ω\u003c\/li\u003e\n\u003cli\u003eR2, R3, R8 = 10 kΩ\u003c\/li\u003e\n\u003cli\u003eR5, R6, R9, R10, R11 = 1 kΩ\u003c\/li\u003e\n\u003cli\u003eR7 = optional (not included)\u003c\/li\u003e\n\u003cli\u003eP1 = potentiometer 100 kΩ, linear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCapacitors\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eC1 = 22 µF 16V\u003c\/li\u003e\n\u003cli\u003eC2, C4 = 10 nF\u003c\/li\u003e\n\u003cli\u003eC3 = 150 pF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eMiscellaneous\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eK1 = 4×1 pin socket\u003c\/li\u003e\n\u003cli\u003eK2, K3 = 3.5 mm socket\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003epushbutton, angle mount\u003c\/li\u003e\n\u003cli\u003e0.96\" monochrome I²C OLED display\u003c\/li\u003e\n\u003cli\u003ePCB 150292-1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":52859952922956,"sku":"21221","price":29.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/Elektor-AM-Transmitter-Kit.jpg?v=1760431181"},{"product_id":"elektor-wordy-led-christmas-tree","title":"Elektor 'Wordy' LED Christmas Tree","description":"\u003ch2\u003eMultilingual DIY Kit (incl. 27 RGB LEDs + Raspberry Pi Pico)\u003c\/h2\u003e\n\u003cp\u003eBring some engineering magic to your festive season with the Wordy LED Christmas Tree, a unique DIY electronics kit designed by Elektor. This beautifully engineered 3D Christmas tree combines eleven PCBs, a Raspberry Pi Pico, and 27 addressable RGB LEDs to illuminate Christmas greetings in seven languages: Danish, Dutch, English, French, German, Italian, and Spanish.\u003c\/p\u003e\n\u003cp\u003eUnlike ordinary LED trees, each word inside the tree has its own light chamber, creating a refined, softly glowing display without sound or flicker. The LEDs are fully WS2812-compatible and driven via the popular Adafruit NeoPixel library, making custom animations and color effects easy to create.\u003c\/p\u003e\n\u003cp\u003ePerfect for makers, tinkerers, and festive electronics fans, this kit offers both an enjoyable build and a striking, conversation-worthy decoration. The Wordy Christmas Tree is your perfect holiday maker project!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMultilingual greetings (7 languages) milled into the front panel\u003c\/li\u003e\n\u003cli\u003e3D construction from 11 interlocking PCBs\u003c\/li\u003e\n\u003cli\u003ePowered by Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003e27 individually addressable RGB LEDs (pre-mounted)\u003c\/li\u003e\n\u003cli\u003eSmooth fade-in and fade-out animations\u003c\/li\u003e\n\u003cli\u003eFully programmable using the Arduino IDE\u003c\/li\u003e\n\u003cli\u003eA 5-V power supply (with micro-USB connector) capable of ≥1 A is recommended for maximum brightness (not included)\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 130 x 115 x 75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll required PCBs with LEDs and other SMD parts mounted\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Pico (to be soldered \u0026amp; programmed by the user)\u003c\/li\u003e\n\u003cli\u003e3-way pin header (to be soldered by the user)\u003c\/li\u003e\n\u003cli\u003e3-way pin socket (to be soldered by the user)\u003c\/li\u003e\n\u003cli\u003e4x Self-adhesive dome bumpers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProject Page\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/labs\/wordy-christmas-tree\" target=\"_blank\"\u003eElektor Labs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/LsjDuQLME6U\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":53449520054604,"sku":"21232","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/Elektor-Wordy-Christmas-Tree.png?v=1763473682"},{"product_id":"elektor-low-noise-lab-power-supply","title":"Elektor Low-Noise Lab Power Supply","description":"\u003cp\u003eThe Elektor Low-Noise Lab Power Supply is a fully analogue, adjustable, medium-power symmetrical bench supply that contains no switching or digital components. It provides an output voltage adjustable between 0 V and ±22 V, and an output current adjustable from 0 A to 1 A. Because it avoids any form of switching circuitry, the design delivers extremely low noise. To display both output voltages and currents, four miniature moving-coil panel meters are used.\u003c\/p\u003e\n\u003cp\u003eMost modern laboratory power supplies and AC adapters employ switch-mode techniques. Even the best examples inevitably exhibit high-frequency ripple and other switching artefacts on their output, which can interfere with the testing of sensitive analogue circuits and disturb low-level measurements. To overcome this, the concept here is a completely analogue power supply. Although less efficient than its switch-mode counterparts, the reduced efficiency is of little importance for test-bench use and ensures cleaner, more reliable measurement results.\u003c\/p\u003e\n\u003cp\u003eBecause many analogue circuits require a symmetrical supply, this design delivers positive and negative output voltages of equal magnitude. A small amount of adjustment is available to compensate for any imbalance. Naturally, a variable current-limit function is also included.\u003c\/p\u003e\n\u003cp\u003eThe kit includes the components required to build the power supply, except for the transformers.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e0…+22 V, 0, −22 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current\u003c\/td\u003e\n\u003ctd\u003e0…+1 A, 0…−1 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e−85 dBV, (at 0.95 A\/20 V, B = 22 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e−84 dBV (at 0.95 A\/20 V, B \u0026gt; 500 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRipple\u003c\/td\u003e\n\u003ctd\u003e50 µVRMS (at 950 mA\/20 V, B = 22 kHz, mainly 100 Hz component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3x PCBs: Regulator (PCB-1), Mains Filter (PCB-2) and Transformer (PCB-3)\u003c\/li\u003e\n\u003cli\u003eAll the components except the AC transformers\u003c\/li\u003e\n\u003cli\u003e4x moving-coil meters\u003c\/li\u003e\n\u003cli\u003eAdditional parts for wiring (wires, banana sockets, IEC Power entry module, etc.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNot included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe three AC transformers\u003c\/li\u003e\n\u003cli\u003eAn enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eParts List\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFor the Regulator PCB (240386-1)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eResistors (250 mW, 1%)\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR1 = 12 Ω\u003c\/li\u003e\n\u003cli\u003eR2, R8, R37, R62 = 1 MΩ\u003c\/li\u003e\n\u003cli\u003eR3, R7, R10, R13, R17, R20, R22, R30, R35, R42, R45, R47, R55, R60 = 100 Ω, 600 mW\u003c\/li\u003e\n\u003cli\u003eR4, R5 = 4.7 kΩ\u003c\/li\u003e\n\u003cli\u003eR6 = 100 kΩ\u003c\/li\u003e\n\u003cli\u003eR9, R12, R14, R36, R38, R39, R61, R63, R66, R72, R78, R79 = 10.0 kΩ, 600 mW\u003c\/li\u003e\n\u003cli\u003eR11 = 9.76 kΩ, 600 mW\u003c\/li\u003e\n\u003cli\u003eR15, R40 = 44.2 kΩ, 600 mW\u003c\/li\u003e\n\u003cli\u003eR16, R41, R77 = 1 kΩ\u003c\/li\u003e\n\u003cli\u003eR18, R43 = 1.5 kΩ, 1 W, 5%\u003c\/li\u003e\n\u003cli\u003eR19, R44 = 470 Ω, 1 W, 5%\u003c\/li\u003e\n\u003cli\u003eR21, R46 = 330 Ω, 600 mW\u003c\/li\u003e\n\u003cli\u003eR23, R24, R48, R49 = 1.0 Ω, 1 W\u003c\/li\u003e\n\u003cli\u003eR25, R50 = 1 kΩ, 1 W, 5%\u003c\/li\u003e\n\u003cli\u003eR26, R28, R51, R53 = 1.000 kΩ 0.1%, 15 ppm\/C\u003c\/li\u003e\n\u003cli\u003eR27, R29, R52, R54 = 10.00 kΩ 0.1%, 15 ppm\/C\u003c\/li\u003e\n\u003cli\u003eR31, R56 = 1.2 kΩ, 1 W, 5%\u003c\/li\u003e\n\u003cli\u003eR32, R57 = 47 kΩ\u003c\/li\u003e\n\u003cli\u003eR33, R58 = 270 Ω\u003c\/li\u003e\n\u003cli\u003eR34, R59 = 27 kΩ\u003c\/li\u003e\n\u003cli\u003eR64, R69 = 12.0 kΩ\u003c\/li\u003e\n\u003cli\u003eR65 = 3.0 kΩ, 600 mW\u003c\/li\u003e\n\u003cli\u003eR67, R80 = 470 Ω, 600 mW\u003c\/li\u003e\n\u003cli\u003eR68, R70 = 6.8 kΩ, 600 mW\u003c\/li\u003e\n\u003cli\u003eR71 = 30.0 kΩ,, 600 mW\u003c\/li\u003e\n\u003cli\u003eR73, R74, R75, R76 = 10 MΩ\u003c\/li\u003e\n\u003cli\u003eP1, P2, P3 = 10 kΩ, 200 mW, 20%, potentiometer, 1 turns, single, lin., panel mount\u003c\/li\u003e\n\u003cli\u003eP4, P5 = 500 Ω, 500 mW, 10%, trimmer, 25 turns, 3296Y-1-501LF Bourns\u003c\/li\u003e\n\u003cli\u003eP6, P7 = 10 kΩ, 500 mW, 10%, trimmer, 25 turns, 3296Y-1-501LF Bourns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCapacitors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eC1 = 100 nF, 50 V, 10%, ceramic X7R, LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC2, C3, C6, C7, C30 = 10 µF, 63V, 20%, LS 2.5 mm, 3000hours@105°C\u003c\/li\u003e\n\u003cli\u003eC4, C5, C8, C9, C13, C14, C18, C19, C23, C24, C28, C29, C31, C32, C38, C39 = 100 nF, 250 V, 10%, PET, LS 7.5 mm\u003c\/li\u003e\n\u003cli\u003eC10, C20 = 47 nF, 100 V, 5%, PET, LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC11, C21 = 10 nF, 100 V, 5%, PET, LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC12, C22 = 220 µF, 35 V, 20%, 0.024 Ω, LS2.5\/3.5 mm, Ir 3.4 A, 2000hours@125°C, polymer\u003c\/li\u003e\n\u003cli\u003eC15, C25 = 120 µF, 50 V, 20%, ESR 0.02 Ω, Diam. 10 mm max., LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC16, C26 = 15 nF, 100 V, 5%, PET, LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC17, C27 = 47 nF, 100 V, 5%, PET, LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC33, C34 = 22 µF, 50 V, 20%, LS 2 mm, 10000 hours @ 105°C\u003c\/li\u003e\n\u003cli\u003eC35, C36, C44, C45 = 1 µF, 100 V, 10%, LS 5 mm, ceramic X7R\u003c\/li\u003e\n\u003cli\u003eC37 = 100 uF, 50 V, 20%. LS 3.5 mm\u003c\/li\u003e\n\u003cli\u003eC40, C41, C42, C43, C46, C47, C48, C49 = 1000 µF, 50 V, 20%, LS 5\/7.5 mm, Ir 3.32 A, 10000hours@105°C, D 16 mm\u003c\/li\u003e\n\u003cli\u003eC50, C51, C52, C53 = 47 nF, 100 V, 10%, ceramic X7R, LS 5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eInductors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL1, L2 = 4.7 µH, 3.2 A, 0.033 Ω, LS 5 mm, RLB0914-4R7ML Bourns\u003c\/li\u003e\n\u003cli\u003eL3 = Commom mode choke, 14.5 mH, 3 A, SSRH24NH-30145 Kemet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSemiconductors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eD1, D2, D3, D4, D5, D9, D10, D11, D15 = BAT85, DO-34\u003c\/li\u003e\n\u003cli\u003eD6, D7, D12, D13 = SR560, DO-201AD\u003c\/li\u003e\n\u003cli\u003eD8, D14, D16 = 1N4148, DO-35\u003c\/li\u003e\n\u003cli\u003eD17 = Zenerdiode, 5.6 V, 0.5 W, DO-41\u003c\/li\u003e\n\u003cli\u003eD18, D19 = 1N4004, DO-41\u003c\/li\u003e\n\u003cli\u003eD20, D21 D22, D23 = V30100CI-M3\/P, dual common cathode, TO-220\u003c\/li\u003e\n\u003cli\u003eD24 = Zener diode, 30 V, 1 W, DO-41\u003c\/li\u003e\n\u003cli\u003eLED1, LED2 = LED, red, T-1 (3 mm)\u003c\/li\u003e\n\u003cli\u003eLED3, LED4 = LED, green, T-1 (3 mm)\u003c\/li\u003e\n\u003cli\u003eTVS1, TVS2 = BZW50-33B, R6\u003c\/li\u003e\n\u003cli\u003eT1, T2, T4 = BC337.25, TO-92\u003c\/li\u003e\n\u003cli\u003eT3 = NJW0302G, TO-3P\u003c\/li\u003e\n\u003cli\u003eT5, T6, T8 = BC327.25, TO-92\u003c\/li\u003e\n\u003cli\u003eT7 = NJW0281G, TO-3P\u003c\/li\u003e\n\u003cli\u003eT9 = BD139, TO-126 (SOT-32)\u003c\/li\u003e\n\u003cli\u003eIC1 = LM334Z, TO-92\u003c\/li\u003e\n\u003cli\u003eIC2 = LM4040AIZ-5.0\/NOPB, TO-92 (TO-226AA-3)\u003c\/li\u003e\n\u003cli\u003eIC3, IC4 = OPA2992IDR, SOIC-8\u003c\/li\u003e\n\u003cli\u003eIC5, IC6 = OPA4992IDR, SOIC-14\u003c\/li\u003e\n\u003cli\u003eIC7 = OPA992IDBVR, SOT-23-5\u003c\/li\u003e\n\u003cli\u003eIC8 = LM339N, DIP-14\u003c\/li\u003e\n\u003cli\u003eIC9 = LM317, TO-220\u003c\/li\u003e\n\u003cli\u003eIC10 = LM337, TO-220\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eOthers\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF1, F2 = 5×20 mm fuse, 1.6 A, fast acting\u003c\/li\u003e\n\u003cli\u003eHS1, HS2 = Heatsink MC33271 (for T3\/T7), 2.7°C\/W, PCB mount, height 63.5 mm\u003c\/li\u003e\n\u003cli\u003eK1, K4 = 3-way screw terminal block, LS 3.5 mm, max. 1.5 mm²\u003c\/li\u003e\n\u003cli\u003eK2, K3 = 3-way screw terminal block, LS 3.5 mm, max. 1 mm²\u003c\/li\u003e\n\u003cli\u003eM1, M3 = Moving coil meter, Range 30 V, type 91C4, 45×45 mm\u003c\/li\u003e\n\u003cli\u003eM2, M4 = Moving coil meter, Range 1 A, type 91C4, 45×45 mm²\u003c\/li\u003e\n\u003cli\u003eRE1 = Relay DPDT,5V, UA2-5NU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3× 3-way screw terminal block, LS 3.5 mm, max. 1 mm² (for P1, P2, P3)\u003c\/li\u003e\n\u003cli\u003e4× Pin header, 1×2, vertical, pitch 2.54 mm (for LED1, LED2, LED3, LED4)\u003c\/li\u003e\n\u003cli\u003e4× Pin socket, 1×2, vertical. pitch 2.54 mm (for LED1, LED2, LED3, LED4)\u003c\/li\u003e\n\u003cli\u003e2× Heatsink FK222SA220, 20°C\/W, PCB mount (for IC9 \u0026amp; IC10)\u003c\/li\u003e\n\u003cli\u003e2× Mica thermal pad for TO-220, 12×18×0.05 mm (for IC9 \u0026amp; IC10)\u003c\/li\u003e\n\u003cli\u003e2× Insulating bushing IB 6, TO-220 (for IC9 \u0026amp; IC10)\u003c\/li\u003e\n\u003cli\u003e2× Ceramic thermal pad, 23×20×2 mm (for T3 \u0026amp; T7)\u003c\/li\u003e\n\u003cli\u003e2× PCB Fuse Holder, for 5×20 mm fuse, 10 A (for F1, F2)\u003c\/li\u003e\n\u003cli\u003e2× Cover for PCB Fuse Holder, transparent (for F1, F2)\u003c\/li\u003e\n\u003cli\u003e2× 2-way screw terminal block, LS 3.5 mm, max. 1 mm² (for M1 \u0026amp; M3)\u003c\/li\u003e\n\u003cli\u003e2× 2-way screw terminal block, LS 3.5 mm, max. 1.5 mm² (for M2 \u0026amp; M4)\u003c\/li\u003e\n\u003cli\u003e8× M3 solder lug, thickness 0.35 mm (for M1…M4)\u003c\/li\u003e\n\u003cli\u003eM4 solder lug, thickness 0.35 mm (to connect 4 mm banana connectors)\u003c\/li\u003e\n\u003cli\u003eScreened cable, 1 pair, 2×24 AWG\/0.22 mm², 1 m (for P1, P2 \u0026amp; P3)\u003c\/li\u003e\n\u003cli\u003eIC socket, DIP, 14 contacts (for IC8)\u003c\/li\u003e\n\u003cli\u003eM3 washer, plain, steel\u003c\/li\u003e\n\u003cli\u003eM3 screw, 16 mm, steel, pan head\u003c\/li\u003e\n\u003cli\u003eM3 nut\u003c\/li\u003e\n\u003cli\u003eM3 spring washer\u003c\/li\u003e\n\u003cli\u003e50 mm M3 standoff, steel, male-female\u003c\/li\u003e\n\u003cli\u003e12 mm M3 standoff, steel, male-female\u003c\/li\u003e\n\u003cli\u003e10 mm M3 standoff, steel, male-female\u003c\/li\u003e\n\u003cli\u003eM3 screw, 8 mm, steel, pan head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor the Mains Fiter PCB (240386-2)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eResistor\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR1 = 220 kΩ, 1 W, 500 V, 5%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCapacitors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eC1, C2 = 470 nF, 305 VAC, Class X2, 11 × 27 mm max., LS 15\/22.5 mm\u003c\/li\u003e\n\u003cli\u003eC3, C4, C5, C6 = 2.2 nF, 300 VAC, Class Y2, 13 × 4 mm, LS 10 mm, PP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eInductors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL1, L2 = Common-mode choke, 6.8 mH, 1.7 A, TDK B82732R2172B030\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSemiconductor\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMOV1 = TVS varistor, 300 VAC, S14K300 (230 VAC, B72214S0301K101) and SK14K150 (150 VAC, B72214S0151K101)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eOthers\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eK1, K2 = 3-way screw terminal block, LS 7.62 mm\u003c\/li\u003e\n\u003cli\u003eF1 = Time-delay fuse, 0.5 A (230 VAC) or 1 A (115 VAC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMiscellaneous\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Fuse holder, 5×20 mm, 10 A, 500 VAC\u003c\/li\u003e\n\u003cli\u003e1× Transparent fuse cover\u003c\/li\u003e\n\u003cli\u003e4× 10 mm M3 standoff, steel, male–female\u003c\/li\u003e\n\u003cli\u003e4× M3 screw, 8 mm, steel, pan head\u003c\/li\u003e\n\u003cli\u003e4× M3 nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFor the Transformer PCB (240386-3)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eResistors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR1, R2 = 2.7 kΩ, 600 mW, 1%\u003c\/li\u003e\n\u003cli\u003eR3 = 10.0 kΩ, 600 mW, 1%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCapacitor\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eC1 = 220 µF, 50 V, 20%, Ø10 mm, LS 5 mm, 4000 h @ 105°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTransformers (not included in this kit!)\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTR1, TR2, TR3 = 2×7 V, 25 VA, PCB-mounted toroid, 70060K Talema\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSemiconductors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eD1–D4 = 1N4148, DO-35\u003c\/li\u003e\n\u003cli\u003eD5, D6 = 1N4004, DO-41\u003c\/li\u003e\n\u003cli\u003eD7 = Zener 5.6 V, 1.3 W, DO-41\u003c\/li\u003e\n\u003cli\u003eLED1 = LED, red, T-1 (3 mm)\u003c\/li\u003e\n\u003cli\u003eIC1, IC2 = MOC8021M, CTR ≥ 1000%, DIP-6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eOthers\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF1, F2, F3 = 160 mA time-delay fuse (230 VAC) or 315 mA time-delay fuse (115 VAC)\u003c\/li\u003e\n\u003cli\u003eK1 = 2-way screw terminal block, LS 7.62 mm\u003c\/li\u003e\n\u003cli\u003eK2 = 3-way screw terminal block, LS 3.5 mm, max 1.5 mm²\u003c\/li\u003e\n\u003cli\u003eK3, K4 = 3-way screw terminal block, LS 3.5 mm, max 1 mm²\u003c\/li\u003e\n\u003cli\u003eRE1, RE2 = Relay DPDT, 5 A\/250 VAC \/ 24 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMiscellaneaous\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Pin header 1×2, pitch 2.54 mm + matching socket for LED1\u003c\/li\u003e\n\u003cli\u003e3× Fuse holder 5 × 20 mm, 10 A, 500 VAC + transparent cover\u003c\/li\u003e\n\u003cli\u003e3× M4 screw, 8 mm, pan head + washer for TR1-TR3\u003c\/li\u003e\n\u003cli\u003e8× M3 screw, 8 mm, pan head + nut + washer\u003c\/li\u003e\n\u003cli\u003e8× 10 mm M3 standoff, steel, male–female\u003c\/li\u003e\n\u003cli\u003e2× IC socket, DIP-6 for IC1 \u0026amp; IC2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eAdditional Parts\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 m red insulated wire, stranded, 1.5 mm²\u003c\/li\u003e\n\u003cli\u003e0.5 m blue insulated wire, stranded, 1.5 mm²\u003c\/li\u003e\n\u003cli\u003e0.5 m black insulated wire, stranded, 1.5 mm², 0.5 m\u003c\/li\u003e\n\u003cli\u003e2 m red insulated wire, stranded, D 0.56 mm (0.25 mm²)\u003c\/li\u003e\n\u003cli\u003e2 m black insulated wire, stranded, D 0.56 mm (0.25 mm²)\u003c\/li\u003e\n\u003cli\u003e0.5 m Multicore Cable, Flexible, 3 Core, 0.75 mm² (24 x 0.2 mm)\u003c\/li\u003e\n\u003cli\u003eRed banana socket\u003c\/li\u003e\n\u003cli\u003eBlack banana socket\u003c\/li\u003e\n\u003cli\u003eBlue banana socket\u003c\/li\u003e\n\u003cli\u003eGreen banana socket\u003c\/li\u003e\n\u003cli\u003eIEC Power Entry Module with switch, IEC C14\u003c\/li\u003e\n\u003cli\u003e3 crimp terminals, FASTON, 4.75 x 0.81 mm\u003c\/li\u003e\n\u003cli\u003e3 knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLinks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/labs\/low-noise-power-supply-240386\" target=\"_blank\"\u003eElektor Labs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/labs\/low-noise-lab-power-supply-jumpstarter-page\" target=\"_blank\"\u003eJumpStarter Page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/magazine\/elektor-461\/64472\" target=\"_blank\"\u003eArticle (Part 1)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/magazine\/elektor-473\/64576\" target=\"_blank\"\u003eArticle (Part 2)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elektor Labs","offers":[{"title":"Default Title","offer_id":56579334668620,"sku":"21276","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/Elektor-Low-Noise-Lab-Power-Supply.jpg?v=1782977016"},{"product_id":"elektor-zener-diode-tester","title":"Elektor Zener Diode Tester","description":"\u003cp\u003eThe Elektor Zener Diode Tester is essentially a constant-current source that can be switched in steps from 1 to 50 mA. It can be used to test Z-diodes up to a maximum of 54 V. Thanks to a 60-V step-up converter, the device can be powered by the usual 5 to 12 V.\u003c\/p\u003e\n\u003cp\u003eThe principle of this tester is straightforward. A Z-diode or other DUT (device under test, such as an LED) is biased by an adjustable current source. The voltage across the DUT can be measured with a multimeter. The voltage of most (small) Z-diodes is specified at a current of 5 mA. Depending on the application, the voltage at other currents can also be of interest. That is why six current settings are available: 1, 2, 5, 10, 20, and 50 mA. LEDs are often specified at a current of 20 mA.\u003c\/p\u003e\n\u003cp\u003eWhat can be tested is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhether a Z-diode is defective (short circuit or high impedance).\u003c\/li\u003e\n\u003cli\u003eWhether a Z-diode exhibits the correct Z-voltage.\u003c\/li\u003e\n\u003cli\u003eHow a Z-voltage changes with different currents.\u003c\/li\u003e\n\u003cli\u003eWhat exact voltage is present at an integrated voltage reference.\u003c\/li\u003e\n\u003cli\u003eWhether LEDs in a series chain differ in brightness (hence the 20 mA current).\u003c\/li\u003e\n\u003cli\u003eWhat the current gain is for different base currents in (power) transistors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe kit contains all parts listed in the bill of materials including PCB and enclosure.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e5…12 V\/2 A (USB-C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply current (Itest = 50 mA)\u003c\/td\u003e\n\u003ctd\u003e1.1 A @ 5 V \/ 412 mA @ 12 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSelectable currents\u003c\/td\u003e\n\u003ctd\u003e1, 2, 5, 10, 20, and 50 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. test voltage\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;54 V @ Itest ≥1 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. output voltage\u003c\/td\u003e\n\u003ctd\u003e60 V @ Itest = 0 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage limit at 5 V\u003c\/td\u003e\n\u003ctd\u003e4.5 V @ Itest = 1 mA \/ 5.18 V @ Itest = 50 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure dimensions\u003c\/td\u003e\n\u003ctd\u003e110 x 82 x 44 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCB size\u003c\/td\u003e\n\u003ctd\u003e105.4 x 67.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\"\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e4 mm banana sockets for multimeter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 mm banana sockets for test clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB-C socket for power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eIncluded\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eResistors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eR1 = 3.3 kΩ, 600 mW, 1%\u003c\/li\u003e\n\u003cli\u003eR2 = 0.15 Ω, 1 W, 5%, LS 12.7 mm, ø 3.5 mm\u003c\/li\u003e\n\u003cli\u003eR3, R8 = 180 Ω, 600 mW, 1%\u003c\/li\u003e\n\u003cli\u003eR4, R6, R16 = 1 kΩ, 600 mW, 1%\u003c\/li\u003e\n\u003cli\u003eR5, R19 = 47 kΩ, 600 mW, 1%\u003c\/li\u003e\n\u003cli\u003eR7 = 3.9 kΩ, 1 W, 5%, LS 12.7 mm, ø 3.5 mm\u003c\/li\u003e\n\u003cli\u003eR9, R10, R12 = 10 kΩ, 600 mW, 1%\u003c\/li\u003e\n\u003cli\u003eR11, R13 = 100 Ω, 600 mW 1%\u003c\/li\u003e\n\u003cli\u003eR14 = 249 Ω, 600 mW, 1%\u003c\/li\u003e\n\u003cli\u003eR15 = 499 Ω, 600 mW, 1%\u003c\/li\u003e\n\u003cli\u003eR17 = 2.49 kΩ, 250 mW, 1%\u003c\/li\u003e\n\u003cli\u003eR18 = 4.99 kΩ, 250 mW, 1%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCapacitors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eC1 = 470 uF \/ 35 V, 20%, Ir = 1.86 A, ø 12.5 mm, LS 5 mm, ESR = 0.038 Ω (Panasonic EEUTP1V471)\u003c\/li\u003e\n\u003cli\u003eC2 = 1 uF \/ 100 V, 10%, X7R, LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC3 = 2.2 nF \/ 50 V, 10%, X7R, LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC4, C7 = 100 nF \/ 100 V, 10%, X7R, LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC5 = 100 uF \/ 100 V, 20%, ø 14 mm max., LS 5 mm\u003c\/li\u003e\n\u003cli\u003eC6 = 1 nF \/ 100 V, 10%, X7R, LS 5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eInductor\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL1 = 100 uH, Irms = 2.4 A, Isat = 3.5 A, 0.09 Ω, radial, pitch 2.5\/5\/10 mm, ø 14 mm max. (Kemet SBC8-101-242)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSemiconductors\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eD1 = MUR120G, DO-41\u003c\/li\u003e\n\u003cli\u003eD2, D4 = STPS3150RL, DO-201AD\u003c\/li\u003e\n\u003cli\u003eD3 = Z-diode, 18 V, 1.3 W (BZX85C18)\u003c\/li\u003e\n\u003cli\u003eD5 = Z-diode, 5.1 V, 0.5 W (1N5231B)\u003c\/li\u003e\n\u003cli\u003eLED1 = LED in pushbutton S1\u003c\/li\u003e\n\u003cli\u003eLED2 = LED, green, 3 mm\u003c\/li\u003e\n\u003cli\u003eIC1 = MC34063, DIP-8\u003c\/li\u003e\n\u003cli\u003eIC2 = LM4040BIZ-5.0\/NOPB, TO-92 (TO-226AA-3)\u003c\/li\u003e\n\u003cli\u003eIC3 = TL051CP, DIP-8\u003c\/li\u003e\n\u003cli\u003eT1 = BC327.25, TO-92\u003c\/li\u003e\n\u003cli\u003eT2 = STP40NF10L, TO-220\u003c\/li\u003e\n\u003cli\u003eT3 = IRF9510PBF, TO-220\u003c\/li\u003e\n\u003cli\u003eT4 = 2N7000, TO-92\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eOthers\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eK1, K2, S1, S3 = 2-way screw terminal block, LS 3.5 mm, max. 1.5 mm²\u003c\/li\u003e\n\u003cli\u003econnected to K1 = USB-C socket, 30 V\/3 A, chassis mounted, wired, 9 x 16 mm\u003c\/li\u003e\n\u003cli\u003econnected to K2 = Banana Connector, 2 mm, Socket, 60 VDC, Panel Mount, red (Multicomp 24.102.1)\u003c\/li\u003e\n\u003cli\u003econnected to K2 = Banana Connector, 2 mm, Socket, 60 VDC, Panel Mount, black (Multicomp 24.102.2)\u003c\/li\u003e\n\u003cli\u003eTest clip, red, 30 VAC\/60 VDC (Hirschmann 931467101)\u003c\/li\u003e\n\u003cli\u003eTest clip, black, 30 VAC\/60 VDC (Hirschmann 931467100)\u003c\/li\u003e\n\u003cli\u003eS1 = Pushbutton, panel mount, SPST-NO, 30 DC\/100 mA, with red LED\u003c\/li\u003e\n\u003cli\u003eS2 = Rotary Switch, 6 position, 2 pole, 30°, 250 V\/150 mA\u003c\/li\u003e\n\u003cli\u003eS3 = Toggle switch, panel mount, SPDT, solder lugs, 28 VDC\u003c\/li\u003e\n\u003cli\u003eT2, T3 = Heat sink, 15°C\/W, FK 214 SA-CB\u003c\/li\u003e\n\u003cli\u003eEnclosure Hammond 1591XXSSBK, ABS, 110 x 82 x 44 mm\u003c\/li\u003e\n\u003cli\u003eKnob for S2, round shaft 6 mm, ø 21 mm, with indicator line (Multicomp CP-LB21-6-6D)\u003c\/li\u003e\n\u003cli\u003e4 x Self-tapping screw #4-1\/4\", carbon steel, pan head\u003c\/li\u003e\n\u003cli\u003eBanana plug, red, 2 mm, 60 VDC (Multicomp 25.205.1)\u003c\/li\u003e\n\u003cli\u003eBanana plug, black, 2 mm, 60 VDC (Multicomp 25.205.2)\u003c\/li\u003e\n\u003cli\u003eBanana socket, black 4 mm, panel mount\u003c\/li\u003e\n\u003cli\u003eBanana socket, red 4 mm, panel mount\u003c\/li\u003e\n\u003cli\u003efor LED1, LED2 = Pin header, 1 x 2, vertical, pitch 2.54 mm\u003c\/li\u003e\n\u003cli\u003efor LED1, LED2 = Pin socket, 1 x 2, vertical, pitch 2.54 mm\u003c\/li\u003e\n\u003cli\u003efor T2, T3 = M3 screw, 10 mm, steel, pan head\u003c\/li\u003e\n\u003cli\u003e2 x M3 washer, plain, steel\u003c\/li\u003e\n\u003cli\u003e4 x M3 nut\u003c\/li\u003e\n\u003cli\u003efor IC1, IC3 = DIP-8 socket\u003c\/li\u003e\n\u003cli\u003eWire, black, 0.25 mm² (24 AWG), stranded 14 x 0.15 mm, 1 m\u003c\/li\u003e\n\u003cli\u003eWire, red, 0.25 mm² (24 AWG), stranded 14 x 0.15 mm, 1 m\u003c\/li\u003e\n\u003cli\u003ePCB 250772-1 v1.1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLinks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/magazine\/elektor-497\/64873\" target=\"_blank\"\u003eArticle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.elektormagazine.com\/labs\/zener-diode-tester-250772\" target=\"_blank\"\u003eElektor Labs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Elektor","offers":[{"title":"Default Title","offer_id":56950785737036,"sku":"21289","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0626\/6280\/3788\/files\/Elektor-Zener-Diode-Tester.jpg?v=1782391611"}],"url":"https:\/\/www.qavlunxerzi.info\/collections\/kits.oembed","provider":"Elektor","version":"1.0","type":"link"}